How to Reset Epson BX535WD Waste Ink Counter

Epson BX535WD Waste Ink Counter Reset

When the Epson BX535WD reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson BX535WD tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson BX535WD Ink Pad Counter Warning?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson BX535WD waste counter reset in minutes.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Step-by-Step: Epson BX535WD Waste Counter Reset

  1. Krok 1: Connect Epson BX535WD to a Windows computer with a stable Internet connection using a USB cable.
  2. Krok 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson BX535WD.
  3. Krok 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson BX535WD.
Buy Reset Key ⬇️ Download Wic Reset Connect Pokyny

Most Epson BX535WD waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson BX535WD – Waste Ink Counter Reset using Wic Reset Connect.

Nákupný košík