Epson XP-611 Waste Ink Counter Reset

The Epson XP-611 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson XP-611 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson XP-611 Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson XP-611 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Step-by-Step: Epson XP-611 Waste Counter Reset

1. Pasul 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-611 via USB (Wi-Fi reset is not supported).
2. Pasul 2: Run Wic Reset Connect as Administrator and confirm Epson XP-611 is detected.
3. Pasul 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-611.

Most Epson XP-611 waste counter resets finish in ~1–2 minutes.

System Requirements

• Windows 7/8/10/11 PC
• Stable Internet connection during reset
• Valid Wic Reset Connect reset key
• USB connection required (Wi-Fi reset not supported)

If the Printer Is Not Detected

• Temporarily disable VPN/proxy if validation fails.
• Close Epson Status Monitor or other printer utilities.
• Run the app as Administrator.
• Use a direct USB connection (avoid hubs).
• Restart printer and PC, then try again.

Frequently Asked Questions