Epson XP-611 Waste Ink Counter Reset

The Epson XP-611 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson XP-611 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson XP-611 Show ‘Service Required’?

与 Wic Reset Connect, you can reset the Epson XP-611 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

常见症状

• ‘驱动程序或实用程序中的 ’需要服务"/使用寿命信息
• 维护/支持代码（因型号/驱动程序而异）
• 清洁循环后停止打印
• 重新启动打印机后，警告重复出现

Step-by-Step: Epson XP-611 Waste Counter Reset

1. 步骤 1： Use a Windows PC (7–11) with Internet access. Connect Epson XP-611 via USB (Wi-Fi reset is not supported).
2. 步骤 2： 运行 Wic Reset Connect as Administrator and confirm Epson XP-611 is detected.
3. 步骤 3： 输入重置密钥并按 重置. Wait ~1–2 minutes, then restart Epson XP-611.

Most Epson XP-611 waste counter resets finish in ~1–2 minutes.

系统要求

• Windows 7/8/10/11 电脑
• 重置期间稳定的互联网连接
• 有效 Wic 复位连接复位键
• 需要 USB 连接（不支持 Wi-Fi 重置）

如果检测不到打印机

• 如果验证失败，则暂时禁用 VPN/代理。.
• 关闭 Epson 状态监视器或其他打印机实用程序。.
• 以管理员身份运行应用程序。.
• 使用直接 USB 连接（避免使用集线器）。.
• 重新启动打印机和电脑，然后再试一次。.

常见问题