Epson XP-610 Ink Pad Counter Reset Guide

Epson XP-610 Waste Ink Counter Reset

The Epson XP-610 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-610 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson XP-610 Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson XP-610 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Epson XP-610 Ink Pad Counter Reset – Quick Steps

  1. Pasul 1: Prepare a Windows PC + USB cable and connect Epson XP-610 directly. Keep Internet enabled for validation.
  2. Pasul 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-610.
  3. Pasul 3: Use the key to reset the counter, wait for completion, then restart Epson XP-610 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrucţiuni

Most Epson XP-610 waste counter resets finish in ~1–2 minutes.

What You Need

  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)

FAQ

How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson XP-610 – Waste Ink Counter Reset using Wic Reset Connect.

Cărucior de cumpărături