Model-specific reset guide
Epson XP-610 Ponastavitev števca odpadnega črnila
Epson XP-610 records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.
Understanding the Epson XP-610 waste ink warning
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson XP-610, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect is designed to reset the compatible counter in Epson XP-610. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson XP-610
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for XP-610 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson XP-610 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-610.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson XP-610 is not detected
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
Epson XP-610 reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Does Epson XP-610 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Can I reset Epson XP-610 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson XP-610
Ready to restore Epson XP-610? Check the requirements once more and start the guided reset.