Epson NX635 Waste Ink Counter Reset

Epson NX635 Waste Ink Counter Reset

The Epson NX635 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson NX635 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson NX635 Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson NX635 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Step-by-Step: Epson NX635 Waste Counter Reset

  1. Pasul 1: Use a Windows PC (7–11) with Internet access. Connect Epson NX635 via USB (Wi-Fi reset is not supported).
  2. Pasul 2: Start Wic Reset Connect in Administrator mode and wait until Epson NX635 appears in the device list.
  3. Pasul 3: Paste the reset key, click Reset, and after completion power-cycle Epson NX635.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrucţiuni

Most Epson NX635 waste counter resets finish in ~1–2 minutes.

Troubleshooting

  • Use a direct USB connection (avoid hubs).
  • Close Epson Status Monitor or other printer utilities.
  • Try another USB cable (some cables are charge-only).
  • Run the app as Administrator.
  • Temporarily disable VPN/proxy if validation fails.

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson NX635 – Waste Ink Counter Reset using Wic Reset Connect.

Cărucior de cumpărături