Epson NX635 Waste Ink Counter Reset

The Epson NX635 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson NX635 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson NX635 Show ‘Service Required’?

与 Wic Reset Connect, you can reset the Epson NX635 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

典型标志

打印机即使有墨水也拒绝打印
爱普生状态监视器显示维护警告
闪烁的灯光和受阻的工作
设备被锁定，直到执行重置

Step-by-Step: Epson NX635 Waste Counter Reset

步骤 1： Use a Windows PC (7–11) with Internet access. Connect Epson NX635 via USB (Wi-Fi reset is not supported).
步骤 2： 开始 Wic Reset Connect in Administrator mode and wait until Epson NX635 appears in the device list.
步骤 3： 粘贴重置密钥，点击重置, and after completion power-cycle Epson NX635.

购买重置密钥 ⬇️ 下载 Wic 重置连接说明

Most Epson NX635 waste counter resets finish in ~1–2 minutes.

故障排除

使用直接 USB 连接（避免使用集线器）。.
关闭 Epson 状态监视器或其他打印机实用程序。.
试试另一条 USB 电缆（有些电缆只能充电）。.
以管理员身份运行应用程序。.
如果验证失败，则暂时禁用 VPN/代理。.

常见问题

可以通过 Wi-Fi 重置吗？

重置需要通过 USB 连接到 Windows PC。.

如果重置不起作用怎么办？

检查 USB 电缆/端口，以管理员身份运行，并关闭其他打印机实用程序。.

需要多长时间？

通常约 1-2 分钟。.

我需要服务中心吗？

通常不用于废墨计数器锁；重置通常就足够了。.

Guide prepared for Epson NX635 – Waste Ink Counter Reset using Wic Reset Connect.