Epson ET-2856 Ink Pad Counter Reset Guide

Epson ET-2856 Waste Ink Counter Reset

The Epson ET-2856 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2856 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson ET-2856 Waste Ink Counter

With Wic Reset Connect, you can reset the Epson ET-2856 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Three Steps to Restore Epson ET-2856 Printing

  1. Pasul 1: Use a Windows PC (7–11) with Internet access. Connect Epson ET-2856 via USB (Wi-Fi reset is not supported).
  2. Pasul 2: Start Wic Reset Connect in Administrator mode and wait until Epson ET-2856 appears in the device list.
  3. Pasul 3: Paste the reset key, click Reset, and after completion power-cycle Epson ET-2856.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrucţiuni

Most Epson ET-2856 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)

Frequently Asked Questions

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson ET-2856 – Waste Ink Counter Reset using Wic Reset Connect.

Cărucior de cumpărături