Epson ET-2856 Waste Ink Counter Reset

The Epson ET-2856 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2856 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson ET-2856 Waste Ink Counter

S Wic Reset Connect, you can reset the Epson ET-2856 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Uobičajeni simptomi

• ‘Potreban servis’ / poruka o vijeku trajanja u upravljačkom programu ili korisničkom sučelju
• Kôd za održavanje/podršku (razlikuje se ovisno o modelu/vozaču)
• Tiskanje se zaustavlja nakon ciklusa čišćenja
• Upozorenje se ponavlja nakon ponovnog pokretanja pisača

Three Steps to Restore Epson ET-2856 Printing

1. Korak 1: Use a Windows PC (7–11) with Internet access. Connect Epson ET-2856 via USB (Wi-Fi reset is not supported).
2. Korak 2: Počni Wic Reset Connect in Administrator mode and wait until Epson ET-2856 appears in the device list.
3. Korak 3: Umetnite reset-ključ i kliknite Ponovno pokretanje, and after completion power-cycle Epson ET-2856.

Most Epson ET-2856 waste counter resets finish in ~1–2 minutes.

Prije nego što počnete

• Valjani Wic resetni ključ za povezivanje
• Windows 7/8/10/11 PC
• Stabilna internetska veza tijekom resetiranja
• Potrebna je USB veza (ne podržava se resetiranje putem Wi-Fi-ja)

Često postavljana pitanja