Model-specific reset guide
Epson CX9400Fax Resetare contor deșeuri de cerneală
A waste ink counter warning can prevent Epson CX9400Fax from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
What the Epson CX9400Fax service message means
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson CX9400Fax, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect is designed to reset the compatible counter in Epson CX9400Fax. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson CX9400Fax
The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.
-
Install the original driver
Install the official Epson driver for CX9400Fax and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson CX9400Fax to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson CX9400Fax.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson CX9400Fax is not detected
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
Epson CX9400Fax reset FAQ
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Does Epson CX9400Fax need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Restore Epson CX9400Fax
Ready to restore Epson CX9400Fax? Check the requirements once more and start the guided reset.