Model-specific reset guide
Canon MX499 Ink Absorber Full Reset
If Canon MX499 displays an ink absorber full or service-required warning, the stored waste ink counter may have reached its limit. This guide covers service mode, USB preparation and the reset itself.
Before resetting Canon MX499
The lock is based on accumulated maintenance activity. Resetting Canon MX499 changes the counter value but does not remove ink already held in the absorber material.
Wic Reset Connect is designed to reset the compatible counter in Canon MX499. The physical waste ink system should still be inspected and maintained when necessary.
Enter service mode on Canon MX499
The Stop/Reset press count varies across Canon series. Use the complete service-mode guide and select the procedure for this printer instead of guessing.
Reset the counter in Canon MX499
Prepare Canon MX499 before entering the key. A stable service-mode state and direct USB connection are essential.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the linked guide.
-
Connect directly by USB
Connect Canon MX499 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon MX499 is not detected
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
- Connect Canon MX499 directly to the computer and try another data-capable USB cable or port.
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
Canon MX499 reset FAQ
Does Canon MX499 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
De câte ori trebuie să apăs pe Stop/Reset?
The correct count depends on the printer series. Use the linked Canon service-mode guide and do not guess.
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
Restore Canon MX499
Ready to reset Canon MX499? Verify the power light, USB connection and service-mode state before continuing.