Model-specific reset guide
Canon MG5440 Ink Absorber Full Reset
If Canon MG5440 displays an ink absorber full or service-required warning, the stored waste ink counter may have reached its limit. This guide covers service mode, USB preparation and the reset itself.
What stops Canon MG5440 from printing
Cleaning operations send unused ink into absorber pads inside the printer. Canon MG5440 estimates their usage with an electronic counter and can lock printing when that value reaches its limit.
Wic Reset Connect is designed to reset the compatible counter in Canon MG5440. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon MG5440
- Turn the printer off.
- Apăsați și mențineți apăsat Oprire/Resetare.
- În timp ce țineți apăsat Stop/Reset, apăsați și țineți apăsat Putere.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset de 6 ori.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon MG5440
Prepare Canon MG5440 before entering the key. A stable service-mode state and direct USB connection are essential.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon MG5440 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon MG5440 is not detected
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
- Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
- Connect Canon MG5440 directly to the computer and try another data-capable USB cable or port.
Canon MG5440 reset FAQ
Does Canon MG5440 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
De câte ori trebuie să apăs pe Stop/Reset?
For Canon MG5440, use 6 Stop/Reset presses in the sequence shown on this page.
Restore Canon MG5440
Ready to reset Canon MG5440? Verify the power light, USB connection and service-mode state before continuing.