Model-specific reset guide
Canon MG5350 Ink Absorber Full Reset
If Canon MG5350 displays an ink absorber full or service-required warning, the stored waste ink counter may have reached its limit. This guide covers service mode, USB preparation and the reset itself.
Why Canon MG5350 reports an absorber error
Waste ink is routed away from the print head and retained inside the printer. The firmware in Canon MG5350 calculates usage and may stop new jobs to reduce overflow risk.
Wic Reset Connect is designed to reset the compatible counter in Canon MG5350. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon MG5350
- Turn the printer off.
- Apăsați și mențineți apăsat Oprire/Resetare.
- În timp ce țineți apăsat Stop/Reset, apăsați și țineți apăsat Putere.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset de 6 ori.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon MG5350
Check cartridges, close Canon utilities and connect the printer directly to Windows before beginning the reset.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon MG5350 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon MG5350 is not detected
- Connect Canon MG5350 directly to the computer and try another data-capable USB cable or port.
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
Canon MG5350 reset FAQ
Does Canon MG5350 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
De câte ori trebuie să apăs pe Stop/Reset?
For Canon MG5350, use 6 Stop/Reset presses in the sequence shown on this page.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Restore Canon MG5350
Complete the Canon MG5350 absorber counter reset in a few carefully prepared steps.