Model-specific reset guide
Canon MB2044 Ink Absorber Full Reset
When Canon MB2044 reports that the ink absorber is full, turning it off and on will not normally remove the lock. The printer must be prepared correctly and its counter reset.
The waste ink counter inside Canon MB2044
Cleaning operations send unused ink into absorber pads inside the printer. Canon MB2044 estimates their usage with an electronic counter and can lock printing when that value reaches its limit.
Wic Reset Connect is designed to reset the compatible counter in Canon MB2044. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon MB2044
- Turn the printer off.
- Apăsați și mențineți apăsat Oprire/Resetare.
- În timp ce țineți apăsat Stop/Reset, apăsați și țineți apăsat Putere.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset de 5 ori.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon MB2044
The counter reset normally takes only a few minutes after Canon MB2044 has entered service mode successfully.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon MB2044 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon MB2044 is not detected
- Connect Canon MB2044 directly to the computer and try another data-capable USB cable or port.
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
Canon MB2044 reset FAQ
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
Does the reset clean the ink absorber?
No. It resets the stored counter. Inspect, clean or replace the absorber pads when their physical condition requires maintenance.
Restore Canon MB2044
Wic Reset Connect combines a guided reset with support if Canon MB2044 does not respond as expected.