Model-specific reset guide
Canon MB2040 Ink Absorber Full Reset
The waste ink system in Canon MB2040 collects ink used during cleaning cycles. Once the estimated limit is reached, service mode and a compatible counter reset may be required.
What stops Canon MB2040 from printing
Canon MB2040 uses a stored counter as a maintenance safeguard. Reaching the threshold can produce an Ink Absorber Full, Service Required or related support-code message.
Wic Reset Connect is designed to reset the compatible counter in Canon MB2040. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon MB2040
- Turn the printer off.
- Apăsați și mențineți apăsat Oprire/Resetare.
- În timp ce țineți apăsat Stop/Reset, apăsați și țineți apăsat Putere.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset de 5 ori.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon MB2040
Prepare Canon MB2040 before entering the key. A stable service-mode state and direct USB connection are essential.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon MB2040 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon MB2040 is not detected
- Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
Canon MB2040 reset FAQ
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
Does Canon MB2040 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
Does the reset clean the ink absorber?
No. It resets the stored counter. Inspect, clean or replace the absorber pads when their physical condition requires maintenance.
Restore Canon MB2040
Prepare Canon MB2040, enter service mode and complete the reset with a valid Wic Reset Connect key.