Epson XP-55 Waste Ink Counter Reset

If your Epson XP-55 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson XP-55 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson XP-55 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson XP-55 waste counter reset in minutes.

Common Symptoms

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Step-by-Step: Epson XP-55 Waste Counter Reset

1. Passo 1: Connect Epson XP-55 to a Windows computer with a stable Internet connection using a USB cable.
2. Passo 2: Start Wic Reset Connect in Administrator mode and wait until Epson XP-55 appears in the device list.
3. Etapa 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-55.

Most Epson XP-55 waste counter resets finish in ~1–2 minutes.

What You Need

• Stable Internet connection during reset
• Valid Wic Reset Connect reset key
• USB connection required (Wi-Fi reset not supported)
• Windows 7/8/10/11 PC

Common Fixes

• Temporarily disable VPN/proxy if validation fails.
• Use a direct USB connection (avoid hubs).
• Try another USB cable (some cables are charge-only).
• Close Epson Status Monitor or other printer utilities.
• Restart printer and PC, then try again.

Frequently Asked Questions