Epson XP-30 Ink Pad Counter Reset Guide

Epson XP-30 Waste Ink Counter Reset

The Epson XP-30 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson XP-30 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson XP-30 Show ‘Service Required’?

Most Epson XP-30 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Three Steps to Restore Epson XP-30 Printing

  1. Passo 1: Prepare a Windows PC + USB cable and connect Epson XP-30 directly. Keep Internet enabled for validation.
  2. Passo 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-30.
  3. Etapa 3: Use the key to reset the counter, wait for completion, then restart Epson XP-30 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruções

Most Epson XP-30 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset

FAQ

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson XP-30 – Waste Ink Counter Reset using Wic Reset Connect.

Carrinho de compras