Epson L3266 Waste Ink Counter Reset

Epson L3266 Waste Ink Counter Reset

If your Epson L3266 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3266 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson L3266 Show ‘Service Required’?

Most Epson L3266 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Three Steps to Restore Epson L3266 Printing

  1. Passo 1: Connect Epson L3266 to a Windows computer with a stable Internet connection using a USB cable.
  2. Passo 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson L3266.
  3. Etapa 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson L3266.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruções

Most Epson L3266 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson L3266 – Waste Ink Counter Reset using Wic Reset Connect.

Carrinho de compras