How to Reset Epson L200 Waste Ink Counter

Epson L200 Waste Ink Counter Reset

The Epson L200 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson L200 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson L200 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson L200 waste counter reset in minutes.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Epson L200 Ink Pad Counter Reset – Quick Steps

  1. Passo 1: Use a Windows PC (7–11) with Internet access. Connect Epson L200 via USB (Wi-Fi reset is not supported).
  2. Passo 2: Run Wic Reset Connect as Administrator and confirm Epson L200 is detected.
  3. Etapa 3: Paste the reset key, click Reset, and after completion power-cycle Epson L200.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruções

Most Epson L200 waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson L200 – Waste Ink Counter Reset using Wic Reset Connect.

Carrinho de compras