Epson K100 Waste Ink Counter Reset

Epson K100 Waste Ink Counter Reset

When the Epson K100 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson K100 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson K100 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson K100 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Reset Epson K100 Waste Ink Counter in 3 Steps

  1. Passo 1: Connect Epson K100 to a Windows computer with a stable Internet connection using a USB cable.
  2. Passo 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson K100.
  3. Etapa 3: Paste the reset key, click Reset, and after completion power-cycle Epson K100.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruções

Most Epson K100 waste counter resets finish in ~1–2 minutes.

Troubleshooting

  • Restart printer and PC, then try again.
  • Close Epson Status Monitor or other printer utilities.
  • Run the app as Administrator.
  • Temporarily disable VPN/proxy if validation fails.
  • Try another USB cable (some cables are charge-only).

FAQ

How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson K100 – Waste Ink Counter Reset using Wic Reset Connect.

Carrinho de compras