Epson ET-2876 Ink Pad Counter Reset Guide

Epson ET-2876 Waste Ink Counter Reset

When the Epson ET-2876 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson ET-2876 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson ET-2876 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson ET-2876 waste counter reset in minutes.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Reset Epson ET-2876 Waste Ink Counter in 3 Steps

  1. Passo 1: Prepare a Windows PC + USB cable and connect Epson ET-2876 directly. Keep Internet enabled for validation.
  2. Passo 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson ET-2876.
  3. Etapa 3: Use the key to reset the counter, wait for completion, then restart Epson ET-2876 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruções

Most Epson ET-2876 waste counter resets finish in ~1–2 minutes.

FAQ

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson ET-2876 – Waste Ink Counter Reset using Wic Reset Connect.

Carrinho de compras