Epson ET-1113 Ink Pad Counter Reset Guide

Epson ET-1113 Waste Ink Counter Reset

The Epson ET-1113 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-1113 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson ET-1113 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson ET-1113 waste counter reset in minutes.

Step-by-Step: Epson ET-1113 Waste Counter Reset

  1. Passo 1: Prepare a Windows PC + USB cable and connect Epson ET-1113 directly. Keep Internet enabled for validation.
  2. Passo 2: Run Wic Reset Connect as Administrator and confirm Epson ET-1113 is detected.
  3. Etapa 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson ET-1113.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruções

Most Epson ET-1113 waste counter resets finish in ~1–2 minutes.

What You Need

  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC

Troubleshooting

  • Use a direct USB connection (avoid hubs).
  • Temporarily disable VPN/proxy if validation fails.
  • Restart printer and PC, then try again.
  • Try another USB cable (some cables are charge-only).
  • Run the app as Administrator.

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson ET-1113 – Waste Ink Counter Reset using Wic Reset Connect.

Carrinho de compras