Epson EP-775A Waste Ink Counter Reset

If your Epson EP-775A suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

A waste ink counter in the Epson EP-775A accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson EP-775A Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson EP-775A waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Three Steps to Restore Epson EP-775A Printing

1. Passo 1: Connect Epson EP-775A to a Windows computer with a stable Internet connection using a USB cable.
2. Passo 2: Start Wic Reset Connect in Administrator mode and wait until Epson EP-775A appears in the device list.
3. Etapa 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson EP-775A.

Most Epson EP-775A waste counter resets finish in ~1–2 minutes.