Epson XP-316 Waste Ink Counter Reset

Epson XP-316 Waste Ink Counter Reset

The Epson XP-316 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson XP-316 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson XP-316 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson XP-316 waste counter reset in minutes.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Step-by-Step: Epson XP-316 Waste Counter Reset

  1. Krok 1: Prepare a Windows PC + USB cable and connect Epson XP-316 directly. Keep Internet enabled for validation.
  2. Krok 2: Run Wic Reset Connect as Administrator and confirm Epson XP-316 is detected.
  3. Krok 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-316.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrukcje

Most Epson XP-316 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson XP-316 – Waste Ink Counter Reset using Wic Reset Connect.

Koszyk