Reset Epson ME-340 Waste Ink Counter in Minutes

Epson ME-340 Waste Ink Counter Reset

The Epson ME-340 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson ME-340 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson ME-340 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson ME-340 waste counter reset in minutes.

Reset Epson ME-340 Waste Ink Counter in 3 Steps

  1. Krok 1: Prepare a Windows PC + USB cable and connect Epson ME-340 directly. Keep Internet enabled for validation.
  2. Krok 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson ME-340.
  3. Krok 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson ME-340.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrukcje

Most Epson ME-340 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC

Common Fixes

  • Temporarily disable VPN/proxy if validation fails.
  • Use a direct USB connection (avoid hubs).
  • Run the app as Administrator.
  • Restart printer and PC, then try again.
  • Try another USB cable (some cables are charge-only).

Frequently Asked Questions

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson ME-340 – Waste Ink Counter Reset using Wic Reset Connect.

Koszyk