Fix Epson XP-335 Service Required – Waste Counter Reset

Epson XP-335 Waste Ink Counter Reset

The Epson XP-335 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-335 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson XP-335 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson XP-335 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

Printer refuses to print even with ink available
Epson Status Monitor shows maintenance warning
Blinking lights and blocked jobs
Device is locked until reset is performed

Reset Epson XP-335 Waste Ink Counter in 3 Steps

Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-335 via USB (Wi-Fi reset is not supported).
Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-335.
Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-335.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson XP-335 waste counter resets finish in ~1–2 minutes.

System Requirements

Windows 7/8/10/11 PC
USB connection required (Wi-Fi reset not supported)
Valid Wic Reset Connect reset key
Stable Internet connection during reset

FAQ

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

How long does it take?

Usually about 1–2 minutes.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson XP-335 – Waste Ink Counter Reset using Wic Reset Connect.