Epson ME-560 Waste Ink Counter Reset

When the Epson ME-560 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson ME-560 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson ME-560 Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson ME-560 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Reset Epson ME-560 Waste Ink Counter in 3 Steps

1. Step 1: Connect Epson ME-560 to a Windows computer with a stable Internet connection using a USB cable.
2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson ME-560.
3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson ME-560.

Most Epson ME-560 waste counter resets finish in ~1–2 minutes.

If the Printer Is Not Detected

• Temporarily disable VPN/proxy if validation fails.
• Run the app as Administrator.
• Try another USB cable (some cables are charge-only).
• Restart printer and PC, then try again.
• Use a direct USB connection (avoid hubs).