特定型号重置指南
Epson ME-560 Reset Waste Ink Counter
If your Epson ME-560 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Why Epson ME-560 stops printing
Waste ink produced by cleaning cycles is collected inside the printer. Epson ME-560 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson ME-560. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson ME-560
按照以下步骤建立稳定的 USB 连接并清除废墨计数器。.
-
安装原始驱动程序
Install the official Epson driver for ME-560 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson ME-560 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ME-560.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson ME-560 is not detected
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- Install the original Epson driver for ME-560; a generic Windows driver may not expose the required communication interface.
Epson ME-560 reset FAQ
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
如果第一次重置尝试失败怎么办？
请先解决驱动程序或 USB 通信问题。如果密钥已被使用，请使用新密钥生成器或联系支持人员。.