Canon TS706 Ink Absorber Full Reset
Canon TS706 can lock printing when the waste ink (ink absorber) counter hits a predefined threshold. This guide explains how to reset it.
Inside Canon printers, absorber pads collect excess ink from cleaning and maintenance cycles. The printer uses an internal counter to estimate pad saturation.
This page is prepared for Canon TS706. Service mode instructions are shown only when a matching series procedure is known.
How to Enter Service Mode on Canon TS706
Some Canon series require entering service mode before the ink absorber counter can be reset.
- Turn the printer OFF.
- Press and hold Stop/Reset.
- While holding Stop/Reset, press and hold Power.
- Release Stop/Reset (keep holding Power).
- Press Stop/Reset 5 times.
- Release Power — the printer should enter service mode.
If it doesn’t work, repeat the sequence carefully. The press count depends on the series.
Finalize the Reset and Restore Printing
Once the counter is cleared, Canon TS706 should exit the locked state and printing should resume normally.
Important Notes
Resetting the counter does not physically clean the absorber pads. For heavy usage, pads may eventually need cleaning or replacement.
Reset tools and instructions
If your model does not show a service mode section, it means no matching procedure was found for its series.
FAQ
Guide prepared for Canon TS706 – Ink Absorber / Waste Ink Counter Reset using Wic Reset Connect.