Canon iP4600 Ink Absorber Full Reset

The “Ink Absorber Full” / service required message on Canon iP4600 is common after many cleaning cycles. In most cases, a counter reset restores printing.

During head cleaning, surplus ink is routed to internal absorber pads. Canon iP4600 monitors this via a counter and can lock printing at a threshold.

This page is prepared for Canon iP4600. Service mode instructions are shown only when a matching series procedure is known.

Perform the Waste Ink Counter Reset

Once the counter is cleared, Canon iP4600 should exit the locked state and printing should resume normally.

Maintenance Reminder

Resetting the counter does not physically clean the absorber pads. For heavy usage, pads may eventually need cleaning or replacement.

Reset tools and instructions

For best results, avoid rushing button presses—consistent timing matters.