Model-specific reset guide
Epson NX415 Inktafvalteller resetten
If your Epson NX415 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
What the Epson NX415 service message means
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson NX415, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect is designed to reset the compatible counter in Epson NX415. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson NX415
Correct preparation protects the reset key from being used during a failed communication attempt. Verify each requirement before selecting Reset.
-
Install the original driver
Install the official Epson driver for NX415 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson NX415 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson NX415.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson NX415 is not detected
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Install the original Epson driver for NX415; a generic Windows driver may not expose the required communication interface.
Epson NX415 reset FAQ
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Does Epson NX415 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Can I reset Epson NX415 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson NX415
Ready to restore Epson NX415? Check the requirements once more and start the guided reset.