Epson L375 Waste Ink Counter Reset

Epson L375 Waste Ink Counter Reset

The Epson L375 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L375 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson L375 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson L375 waste counter reset in minutes.

Step-by-Step: Epson L375 Waste Counter Reset

  1. Stap 1: Use a Windows PC (7–11) with Internet access. Connect Epson L375 via USB (Wi-Fi reset is not supported).
  2. Stap 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson L375.
  3. Stap 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson L375.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructies

Most Epson L375 waste counter resets finish in ~1–2 minutes.

What You Need

  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)

Troubleshooting

  • Close Epson Status Monitor or other printer utilities.
  • Run the app as Administrator.
  • Try another USB cable (some cables are charge-only).
  • Temporarily disable VPN/proxy if validation fails.
  • Use a direct USB connection (avoid hubs).

FAQ

How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson L375 – Waste Ink Counter Reset using Wic Reset Connect.

Winkelwagen