Model-specific reset guide
Epson XP-443 は無駄インク カウンターを再調節しました
A waste ink counter warning can prevent Epson XP-443 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Why the ink pad counter blocks Epson XP-443
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson XP-443 adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson XP-443. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson XP-443
Use the sequence below to establish a stable USB connection and clear the waste ink counter.
-
Install the original driver
Install the official Epson driver for XP-443 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson XP-443 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-443.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson XP-443 is not detected
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Install the original Epson driver for XP-443; a generic Windows driver may not expose the required communication interface.
Epson XP-443 reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Does Epson XP-443 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Restore Epson XP-443
Prepare Epson XP-443, purchase a reset key and return to printing without an unnecessary service visit.