Epson WorkForce 325 Waste Ink Counter Reset

If your Epson WorkForce 325 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

A waste ink counter in the Epson WorkForce 325 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson WorkForce 325 Waste Ink Counter

With Wic Reset Connect, you can reset the Epson WorkForce 325 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

‘Service Required’ / service life message in driver or utility
Maintenance/support code (varies by model/driver)
Printing stops after cleaning cycles
Warning repeats after restarting the printer

Step-by-Step: Epson WorkForce 325 Waste Counter Reset

Step 1: Prepare a Windows PC + USB cable and connect Epson WorkForce 325 directly. Keep Internet enabled for validation.
Step 2: Run Wic Reset Connect as Administrator and confirm Epson WorkForce 325 is detected.
Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson WorkForce 325.

Buy Reset Key ⬇️ Download Wic Reset Connect 使用方法

Most Epson WorkForce 325 waste counter resets finish in ~1–2 minutes.

If the Printer Is Not Detected

Use a direct USB connection (avoid hubs).
Run the app as Administrator.
Close Epson Status Monitor or other printer utilities.
Temporarily disable VPN/proxy if validation fails.
Restart printer and PC, then try again.

FAQ

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

How long does it take?

Usually about 1–2 minutes.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson WorkForce 325 – Waste Ink Counter Reset using Wic Reset Connect.