Model-specific reset guide
Epson WF-2630 Reset Waste Ink Counter
When Epson WF-2630 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.
Why Epson WF-2630 stops printing
Waste ink produced by cleaning cycles is collected inside the printer. Epson WF-2630 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson WF-2630. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson WF-2630
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for WF-2630 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson WF-2630 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WF-2630.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson WF-2630 is not detected
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Install the original Epson driver for WF-2630; a generic Windows driver may not expose the required communication interface.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
Epson WF-2630 reset FAQ
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Can I reset Epson WF-2630 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Restore Epson WF-2630
Complete the Epson WF-2630 counter reset with Wic Reset Connect and assistance whenever you need it.