Model-specific reset guide

Epson L350 Reset Waste Ink Counter

When Epson L350 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.

リセットキー$8,00
Instant email deliveryテクニカルサポートが含まれていますReplacement key after a failed reset
The problem

The counter behind the Epson L350 warning

Epson L350 uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.

Wic Reset Connect is designed to reset the compatible counter in Epson L350. The physical waste ink system should still be inspected and maintained when necessary.

Windows 7–11PC or laptop
Direct USBNo Wi-Fi or hub
InternetFor key validation
リセットキーFor this operation
Step by step

Reset the counter in Epson L350

Start with the connection checks below, then run the reset without opening other printer programs during the process.

  1. Install the original driver

    Install the official Epson driver for L350 and confirm that Windows can see the printer.

  2. Connect directly by USB

    Connect Epson L350 to the computer without Wi-Fi, a hub or an adapter.

  3. Start Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L350.

  4. Enter the key and reset

    Enter the purchased key, choose Reset and keep the printer connected until completion.

Finish correctly: After the program confirms completion, close it, turn Epson L350 off for about 10 seconds and switch it on again. The maintenance lock should be cleared.
If Epson L350 is not detected
  • Try another USB port and a known data-capable USB cable if the printer is not detected.
  • Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
  • Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
  • Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.

Open full instructions

Common questions

Epson L350 reset FAQ

Does Epson L350 need service mode?

No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.

Can I reset Epson L350 over Wi-Fi?

No. Wic Reset Connect requires a direct USB connection to the Windows computer.

Does the reset clean or replace the ink pads?

No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.

Reset with confidence

Restore Epson L350

Ready to restore Epson L350? Check the requirements once more and start the guided reset.

Reset key: $8,00
お買い物カゴ
通貨を選択する