Epson ET-1813 Waste Ink Counter Reset

If your Epson ET-1813 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson ET-1813 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson ET-1813 Waste Ink Counter

と Wic Reset Connect, you can reset the Epson ET-1813 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Epson ET-1813 Ink Pad Counter Reset – Quick Steps

1. ステップ1： Connect Epson ET-1813 to a Windows computer with a stable Internet connection using a USB cable.
2. ステップ2： スタート Wic Reset Connect in Administrator mode and wait until Epson ET-1813 appears in the device list.
3. ステップ3： リセットキーを入力し リセット. Wait ~1–2 minutes, then restart Epson ET-1813.

Most Epson ET-1813 waste counter resets finish in ~1–2 minutes.

システム要件

• リセット中の安定したインターネット接続
• 有効なWicリセット コネクトリセットキー
• Windows 7/8/10/11 PC
• USB接続が必要（Wi-Fiリセットには非対応）