Model-specific reset guide
Canon IX6850 Ink Absorber Full Reset
The waste ink system in Canon IX6850 collects ink used during cleaning cycles. Once the estimated limit is reached, service mode and a compatible counter reset may be required.
The waste ink counter inside Canon IX6850
An absorber message concerns both software and maintenance. The counter can be reset, while heavily saturated pads may still need cleaning or replacement.
Wic Reset Connect is designed to reset the compatible counter in Canon IX6850. The physical waste ink system should still be inspected and maintained when necessary.
Enter service mode on Canon IX6850
The Stop/Reset press count varies across Canon series. Use the complete service-mode guide and select the procedure for this printer instead of guessing.
Reset the counter in Canon IX6850
The counter reset normally takes only a few minutes after Canon IX6850 has entered service mode successfully.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the linked guide.
-
Connect directly by USB
Connect Canon IX6850 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon IX6850 is not detected
- Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
Canon IX6850 reset FAQ
Does the reset clean the ink absorber?
No. It resets the stored counter. Inspect, clean or replace the absorber pads when their physical condition requires maintenance.
Does Canon IX6850 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
ストップ/リセットを何回押せばいいですか？
The correct count depends on the printer series. Use the linked Canon service-mode guide and do not guess.
Restore Canon IX6850
Follow the verified steps for Canon IX6850, then restart the printer and return to normal operation.