Model-specific reset guide
Canon iP4810 インク吸収装置の完全リセット
An absorber warning on Canon iP4810 does not necessarily mean that the printer is mechanically damaged. The software counter and the physical pads must be considered separately.
The waste ink counter inside Canon iP4810
Waste ink is routed away from the print head and retained inside the printer. The firmware in Canon iP4810 calculates usage and may stop new jobs to reduce overflow risk.
Wic Reset Connect is designed to reset the compatible counter in Canon iP4810. The physical waste ink system should still be inspected and maintained when necessary.
Enter service mode on Canon iP4810
The Stop/Reset press count varies across Canon series. Use the complete service-mode guide and select the procedure for this printer instead of guessing.
Reset the counter in Canon iP4810
Work through the sequence without rushing. Incorrect button timing or a blinking power light means the printer is not ready for the counter reset.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the linked guide.
-
Connect directly by USB
Connect Canon iP4810 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon iP4810 is not detected
- Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
- Connect Canon iP4810 directly to the computer and try another data-capable USB cable or port.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
Canon iP4810 reset FAQ
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
ストップ/リセットを何回押せばいいですか？
The correct count depends on the printer series. Use the linked Canon service-mode guide and do not guess.
Restore Canon iP4810
Complete the Canon iP4810 absorber counter reset in a few carefully prepared steps.