Model-specific reset guide
Epson XP-710 Reset Waste Ink Counter
When Epson XP-710 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.
What the Epson XP-710 service message means
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson XP-710, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect is designed to reset the compatible counter in Epson XP-710. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson XP-710
The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.
-
Install the original driver
Install the official Epson driver for XP-710 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson XP-710 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-710.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson XP-710 is not detected
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
Epson XP-710 reset FAQ
Can I reset Epson XP-710 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Does Epson XP-710 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson XP-710
Prepare Epson XP-710, purchase a reset key and return to printing without an unnecessary service visit.