How to Reset Epson XP-423 Waste Ink Counter

Epson XP-423 Waste Ink Counter Reset

If your Epson XP-423 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-423 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson XP-423 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson XP-423 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Step-by-Step: Epson XP-423 Waste Counter Reset

  1. Fase 1: Prepare a Windows PC + USB cable and connect Epson XP-423 directly. Keep Internet enabled for validation.
  2. Fase 2: Start Wic Reset Connect in Administrator mode and wait until Epson XP-423 appears in the device list.
  3. Fase 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-423.
Buy Reset Key ⬇️ Download Wic Reset Connect Istruzioni

Most Epson XP-423 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)

FAQ

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson XP-423 – Waste Ink Counter Reset using Wic Reset Connect.

Carrello della spesa