Model-specific reset guide
Epson WF-7018 Azzeramento del contatore di inchiostro esausto
Epson WF-7018 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
What the Epson WF-7018 service message means
Waste ink produced by cleaning cycles is collected inside the printer. Epson WF-7018 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson WF-7018. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson WF-7018
Use the sequence below to establish a stable USB connection and clear the waste ink counter.
-
Install the original driver
Install the official Epson driver for WF-7018 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson WF-7018 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WF-7018.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson WF-7018 is not detected
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
Epson WF-7018 reset FAQ
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Restore Epson WF-7018
Complete the Epson WF-7018 counter reset with Wic Reset Connect and assistance whenever you need it.