Fix Epson NX415 Service Required – Waste Counter Reset

Epson NX415 Waste Ink Counter Reset

The Epson NX415 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson NX415 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson NX415 Show ‘Service Required’?

Most Epson NX415 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Reset Epson NX415 Waste Ink Counter in 3 Steps

Fase 1: Connect Epson NX415 to a Windows computer with a stable Internet connection using a USB cable.
Fase 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson NX415.
Fase 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson NX415.

Buy Reset Key ⬇️ Download Wic Reset Connect Istruzioni

Most Epson NX415 waste counter resets finish in ~1–2 minutes.

System Requirements

USB connection required (Wi-Fi reset not supported)
Stable Internet connection during reset
Valid Wic Reset Connect reset key
Windows 7/8/10/11 PC

If the Printer Is Not Detected

Try another USB cable (some cables are charge-only).
Run the app as Administrator.
Restart printer and PC, then try again.
Close Epson Status Monitor or other printer utilities.
Temporarily disable VPN/proxy if validation fails.

FAQ

How long does it take?

Usually about 1–2 minutes.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson NX415 – Waste Ink Counter Reset using Wic Reset Connect.