How to Reset Epson L4260 Waste Ink Counter

Epson L4260 Waste Ink Counter Reset

The Epson L4260 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson L4260 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson L4260 Waste Ink Counter

Most Epson L4260 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Reset Epson L4260 Waste Ink Counter in 3 Steps

Fase 1: Prepare a Windows PC + USB cable and connect Epson L4260 directly. Keep Internet enabled for validation.
Fase 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson L4260.
Fase 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson L4260.

Buy Reset Key ⬇️ Download Wic Reset Connect Istruzioni

Most Epson L4260 waste counter resets finish in ~1–2 minutes.

FAQ

How long does it take?

Usually about 1–2 minutes.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson L4260 – Waste Ink Counter Reset using Wic Reset Connect.