Epson L3107 Waste Ink Counter Reset

If your Epson L3107 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3107 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson L3107 Ink Pad Counter Warning?

Most Epson L3107 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Three Steps to Restore Epson L3107 Printing

1. Fase 1: Prepare a Windows PC + USB cable and connect Epson L3107 directly. Keep Internet enabled for validation.
2. Fase 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson L3107.
3. Fase 3: Paste the reset key, click Reset, and after completion power-cycle Epson L3107.

Most Epson L3107 waste counter resets finish in ~1–2 minutes.

Before You Begin

• Stable Internet connection during reset
• Windows 7/8/10/11 PC
• Valid Wic Reset Connect reset key
• USB connection required (Wi-Fi reset not supported)

Common Fixes

• Try another USB cable (some cables are charge-only).
• Close Epson Status Monitor or other printer utilities.
• Run the app as Administrator.
• Restart printer and PC, then try again.
• Temporarily disable VPN/proxy if validation fails.

Frequently Asked Questions