Epson ET-1116 Waste Ink Counter Reset

The Epson ET-1116 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-1116 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson ET-1116 Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson ET-1116 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Reset Epson ET-1116 Waste Ink Counter in 3 Steps

1. Fase 1: Connect Epson ET-1116 to a Windows computer with a stable Internet connection using a USB cable.
2. Fase 2: Run Wic Reset Connect as Administrator and confirm Epson ET-1116 is detected.
3. Fase 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson ET-1116.

Most Epson ET-1116 waste counter resets finish in ~1–2 minutes.

Before You Begin

• Windows 7/8/10/11 PC
• USB connection required (Wi-Fi reset not supported)
• Stable Internet connection during reset
• Valid Wic Reset Connect reset key

Troubleshooting

• Try another USB cable (some cables are charge-only).
• Use a direct USB connection (avoid hubs).
• Run the app as Administrator.
• Temporarily disable VPN/proxy if validation fails.
• Close Epson Status Monitor or other printer utilities.

FAQ