Epson EP-806A Waste Ink Counter Reset

The Epson EP-806A delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson EP-806A accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson EP-806A Waste Ink Counter

With Wic Reset Connect, you can reset the Epson EP-806A waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Reset Epson EP-806A Waste Ink Counter in 3 Steps

1. Fase 1: Prepare a Windows PC + USB cable and connect Epson EP-806A directly. Keep Internet enabled for validation.
2. Fase 2: Run Wic Reset Connect as Administrator and confirm Epson EP-806A is detected.
3. Fase 3: Use the key to reset the counter, wait for completion, then restart Epson EP-806A to finalize.

Most Epson EP-806A waste counter resets finish in ~1–2 minutes.

Before You Begin

• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC
• USB connection required (Wi-Fi reset not supported)
• Stable Internet connection during reset

Troubleshooting

• Close Epson Status Monitor or other printer utilities.
• Temporarily disable VPN/proxy if validation fails.
• Run the app as Administrator.
• Restart printer and PC, then try again.
• Use a direct USB connection (avoid hubs).