Model-specific reset guide
Epson EP-806A Reset Waste Ink Counter
If your Epson EP-806A has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
What the Epson EP-806A service message means
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson EP-806A, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect is designed to reset the compatible counter in Epson EP-806A. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson EP-806A
Prepare the computer and connection first. Most unsuccessful attempts are caused by a missing original driver, an indirect USB connection or another Epson utility using the printer.
-
Install the original driver
Install the official Epson driver for EP-806A and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson EP-806A to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson EP-806A.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson EP-806A is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Install the original Epson driver for EP-806A; a generic Windows driver may not expose the required communication interface.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
Epson EP-806A reset FAQ
Can I reset Epson EP-806A over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Restore Epson EP-806A
Ready to restore Epson EP-806A? Check the requirements once more and start the guided reset.