Epson EP-4004 Waste Ink Counter Reset

If your Epson EP-4004 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson EP-4004 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson EP-4004 Waste Ink Counter

Most Epson EP-4004 waste ink counter locks are solved by a software counter reset. Wic Reset Connect fornisce una procedura semplice.

Segni tipici

• ‘Messaggio ’Service Required' / service life nel driver o nell'utility
• Codice di manutenzione/assistenza (varia a seconda del modello/driver)
• La stampa si interrompe dopo i cicli di pulizia
• L'avviso si ripete dopo il riavvio della stampante

Reset Epson EP-4004 Waste Ink Counter in 3 Steps

1. Fase 1: Use a Windows PC (7–11) with Internet access. Connect Epson EP-4004 via USB (Wi-Fi reset is not supported).
2. Fase 2: Aperto Wic Reset Connect with admin privileges and verify device recognition for Epson EP-4004.
3. Fase 3: Inserire il tasto di reset e premere Reset. Wait ~1–2 minutes, then restart Epson EP-4004.

Most Epson EP-4004 waste counter resets finish in ~1–2 minutes.

Prima di iniziare

• Connessione Internet stabile durante il reset
• Wic Reset valido Chiave di reset Connect
• È necessaria la connessione USB (il reset Wi-Fi non è supportato)
• PC Windows 7/8/10/11