Model-specific reset guide
Epson BX620FWD Azzeramento del contatore dell'inchiostro esausto
When Epson BX620FWD reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.
Why Epson BX620FWD stops printing
An ink pad message is a maintenance safeguard. It indicates that Epson BX620FWD has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect is designed to reset the compatible counter in Epson BX620FWD. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson BX620FWD
Complete these steps in order. A direct USB connection and the original Epson driver are essential for reliable communication.
-
Install the original driver
Install the official Epson driver for BX620FWD and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson BX620FWD to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson BX620FWD.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson BX620FWD is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Install the original Epson driver for BX620FWD; a generic Windows driver may not expose the required communication interface.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
Epson BX620FWD reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Can I reset Epson BX620FWD over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Restore Epson BX620FWD
Use the model-specific steps above to reset Epson BX620FWD with a stable connection and a valid key.